EASY DOT TRANSPARENT MONOMER STICKER - NESCHEN

– 100 µm monomeric transparent PVC-film

– one-sided self-adhesive, cadmium-free

– glossy surface (attention pressure-sensitive)

– coated with a solvent-free, age-resistant and permanent elastic

acrylate adhesive

– the “dot-shaped” adhesive coat makes the material easier to

handle and to reposition

– PE release liner providing excellent flatness

– no chemical reactions between solvent-based inks and acrylate

adhesive

– slight surface texture due to the dot shaped adhesive

General Information

– 100 µm monomeric transparent PVC-film

– one-sided self-adhesive, cadmium-free

– glossy surface (attention pressure-sensitive)

– coated with a solvent-free, age-resistant and permanent elastic

acrylate adhesive

– the “dot-shaped” adhesive coat makes the material easier to

handle and to reposition

– PE release liner providing excellent flatness

– no chemical reactions between solvent-based inks and acrylate

adhesive

– slight surface texture due to the dot shaped adhesive

Areas of Application

– suitable for (Eco) Solvent- and Latex inks

(low light colours recommended)

– due to the increased UV radiation when printing with UV-curable

inks, the PVC film may become brittle prematurely. Own tests are

necessarily recommended!

– designed for short term indoor applications like Trade Shows,

Seasonal Sales etc.

– durability (unprinted) up to 2 years- depending on application

area and purpose

– for application on a wide range of substrates (on most of the

commercially available panels etc.)

– not applicable on freshly lacquered surfaces

– also suitable on glass surfaces

– can be applied on smooth and slightly curved surfaces

– Please note that due to the multiple areas of application of this material (combined with various films, sheets of PVC or other application substrates) physically- determined dimensional fluctuation might occur that can possibly be triggered by fluctuations in temperature during processing and/or during actual application.

 

Processing & Handling

– printing profiles with low amounts of light colours are recommended to reach the best printing performance

– easy to remove from nearly all substrates

– mounted on PVC-surfaces, it can remain residue of adhesive when removing

– The removing of the film from heated surfaces (e.g. shop windows, steel surfaces, etc.) is not recommended, otherwise the adhesive may completely stay on the surface. In such cases we recommend cooling down the material and the surface before removing.

– to avoid problems in processing/lamination ensure adequate drying before lamination – drying time of min. 24 hours is recommended

– storage is best to be done in upright position in the original case

– surfaces must be properly prepared and free of contamination

– applying by assistance of water is not recommended

– possibly arising adhesive residues can be removed with help of

denatured alcohol.

– stretching should be minimized as much as possible to prevent

excessive shrinking

– shrinking of the edges on monomeric vinyls may occur during

storage time

– ALWAYS the rolls store together with the label respectively batch

number!

Advantages / Special Features

– very good print quality

– intense colours and very good contrast with high transparency

– “dot-shaped” adhesive coating allows easy and bubble free

positioning

– mirror- inverted printing possible for inside mounted window advertising

– fire protection*: B1 test certificate according DIN 4102-1

 

Variations: Materials

Zanima vas više informacija o proizvodu EASY DOT TRANSPARENT MONOMER STICKER - NESCHEN?

Scroll to Top preloader